4
Operating Instructions – Glass polishing machine Model GPM-5
•
Repeat this process with the other four brushes in any order.
•
Connect the appliance to an earthed socket. The appliance is now ready to use.
•
To turn on the appliance, press the on/off switch on the top of the unit.
•
To polish a glass proceed as follows:
Take a glass (the glass must be rinsed and still damp) and place it over the middle brush.
The middle brush dries and polishes the inside of the glass, while the other brushes dry
and polish the outside of the glass. Then hold the bottom of the glass against one of the
brushes. Repeat this process with each other glass.
•
For glasses with stems proceed as follows:
First dry the base by holding it between the brushes, then polish it like a glass without a
stem.
