4
Note 1:
On a NTSC system, the connector on the A/V equipment is an
RCA jack. Connect the yellow plug to the jack labeled VIDEO, the red
plug to the jack labeled AUDIO RIGHT and the white plug to the jack
labeled AUDIO LEFT.
Note 2:
On a PAL system, connect the Scart connector labeled
TRANSMITTER to the Scart connector labeled OUT on the A/V
equipment.
Note 3:
If the A/V equipment has only one output for audio (mono
sound only), connect the white plug to that single audio output jack.
1.2 Power Supply
a.
Plug one end of the provided power adaptor into a wall outlet and
the other end into the rear of the transmitter. See Fig. 6.
b.
Turn on the transmitter. The LED on the front of the unit should
light up.
VHF/UHF
RF OUT
VIDEO AUDIO IN
Transmitter
A/V Component
TV
Fig. 5
(Red to red, white
to white, and
yellow to yellow)
A/V Cable
