Plug the cord of the AC adapter into the balance.
Then insert the plug of the AC adapter in a wall outlet.
Follow this procedure for the following balances:
AC and LC series balances with a capacity
less than 12 kg
LC series balances with a capacity greater
than 12 kg:
Insert the right-angle plug in the power
receptacle
(19)
as shown, then tighten the slotted
screw with a screwdriver.
Now plug the AC adapter into a wall outlet.
Voltage Selection
(does not apply to balances with a capacity greater
than 12 kg)
You can select the voltage only if you use our portable
power supply (6971172) that has a European-type
plug (rounded prongs).
Connecting Electronic Devices (Peripherals)
Make sure to unplug the AC adapter from the wall
outlet before you connect or disconnect a peripheral
device (printer or PC) to or from the interface port
of the balance.
Safety Precautions
The AC adapter, rated to Class 2 (double insulation),
can be plugged into a wall outlet without taking
any additional safety precautions. The pole of the
output voltage is connected to the balance housing,
which can be grounded for operation.
The interface is also electrically connected to the
balance housing (ground).
1–11
230 V~
115 V~
