Data Interface
If you wish to record your weighing results using
a Sartorius Data Printer, plug the printer connector into
the interface port
(20)
of the balance. You do not
need to adjust any settings.
Remove the protective cap from the data
interface port.
Caution:
Make sure to unplug the AC adapter from the wall
outlet before you connect or disconnect any
peripherals (printer or PC) to or from the interface port
of the balance.
To print data on hard copy or have them output on-
screen on an on-line computer, press the
p
key
(11)
.
For information on special data output parameters,
see “Utilities” in Part 2.
For details on the data interface (such as the
data output or input formats, pin assignment, etc.)
or on interfacing a remote display, see Part 5,
“Interface Description.”
Important Note for Balance/Scale Models Verified
for Use as Legal Measuring Instruments:
When using the balance/scale as a legal
measuring instrument (legal for trade), you are
allowed to connect to it only peripherals authorized
by law. However, if you are not using the
balance/scale as a legal measuring instrument, you
may connect to it any peripherals you wish, e.g.,
additional displays, personal computer, etc. Such
peripherals must be marked to indicate that they are
not allowed to be used when the balance/scale is
being used as a legal measuring instrument.
1–25
