Press the
f
key to change the left-hand number
to “3”
– Press the
p
key to move to the middle number
– Now move from “1” to the right-hand number
(When you move to the right-hand number,
the previously set numeric code will be indicated).
– Press the
f
key to change the right-hand number
to “3”
– Press “TARE” to confirm the code setting
Important Note:
You must press the tare key in order to
confirm
the code
you have just set. This is indicated by the “
o
”
after the code.
– Press
c
to
store the new menu code setting
The current code setting in the balance operating
menu is identified by a small
“o”
after the last number.
When you access the operating menu, the previously
set numeric code will be displayed after selecting
the left-hand and middle numbers, which means the
entire menu code setting is displayed. This makes
it easy for you to check the previously set menu codes.
If you would like to change several menu code
settings, you do not have to press
c
after each
change to leave the balance operating menu.
2–3
