This mode for adapting the display accuracy enables you to weigh with a constant
relative accuracy between 1% and 0.01% over the entire weighing range
of your balance. Select the load-dependent display accuracy independently for
each of the three weighing ranges. The accuracy selected is shown in the top
right-hand corner of the application display field.
PolyRange Function
(application for single-range balances)
The PolyRange function divides a single weighing range into as many as
4 ranges, each with a different readability. In the various ranges, the readability
will adjust so that the last numeral of a weight readout is displayed with
a resolution of 1, 2, 5 or 10 digits (10 digits = only the next to the last numeral
of the readout will change; the last numeral is blanked).
The PolyRange function makes filling easier because the readability becomes
slightly coarser as the load increases and you will not immediately lose an entire
place of readability.
Press the tare control at any range level to restore the full resolution of the first range,
even when the balance is loaded.
Code
Display mode
1st range
2nd range
3rd range
Highest possible accuracy
* 1 8 1
3 2 1
1
)
3 4 1
1
)
Last numeral blanked when
load changes
1 8 2
3 2 2
3 4 2
Rounding factor 2
1 8 3
3 2 3
3 4 3
Rounding factor 5
1 8 4
3 2 4
3 4 4
Rounding factor 10
1 8 5
3 2 5
3 4 5
1%
accuracy
1 8 6
3 2 6 * 3 4 6
0.5% accuracy
1 8 7
3 2 7
3 4 7
0.2% accuracy
1 8 8
3 2 8
3 4 8
0.1% accuracy
1 8 9 * 3 2 9
3 4 9
0.05% accuracy
1 8 10
3 2 10
3 4 10
0.02% accuracy
1 8 11
3 2 11
3 4 11
0.01% accuracy
1 8 12
3 2 12
3 4 12
PolyRange function
1 8 13
3 2 13
3 4 13
* = factory setting
1
) = factory setting on GC 1201-G scales only
2–11
