Display Modes on Verified Balances
You can select the display mode that best meets your individual requirements.
Final Readout Mode
If you are interested in the final readout only, you can select this mode by setting
code 2 5 1. A special symbol, “– –”, will be displayed in any weighing range
until the final stable readout is indicated. For the standard readout mode, set
code 2 5 2 (all readouts).
Special readout mode “– –”
Code
Special symbol “– –” for unstable readings when load changes
2 5 1
Standard digital readout mode
* 2 5 2
Last Numeral Blanked When the Load Changes
As the load on your balance changes, the display resolution is reduced by
a factor of 10 so you will obtain a faster and more stable readout.
In the process, the last numeral is blanked until the load stabilizes. Once the load
has stabilized, the readout is shown again with the full display accuracy, which
means the last numeral is displayed.
Code
Display mode
1st range
2nd range
Highest possible accuracy
* 1 8 1
* 3 2 1
Last numeral blanked when load changes
1 8 2
3 2 2
IQ-Mode
(Load-Dependent Readability)
The IQ-Mode does not apply to verified balances approved for use as legal
measuring instrument.
* = factory setting
2–12
