Utilities for Printouts or Data Transfer
Sartorius balances come standard with an interface. You can plug a Sartorius
printer or a computer into this interface port to print data on hard copy or have
them transferred to your computer. Moreover, you can choose to output data from
your balance to this on-line device either automatically or by pressing the print
key on the balance.
The balance operating menu lets you define the various parameters for data output.
For information on the data formats and for interfacing a computer or other
peripherals, see Part 5, “Interface Description.”
Data Output Parameter
This parameter is coupled with the stability parameter =
stable readout or
no motion is detected
Print on request = data is output only when the print key is pressed or a software
command is received
Auto print = continuous, automatic data output
Code
Print on request regardless of stability
6 1 1
Print on request after stability with storage of the function
* 6 1 2
Print on request at stability without storage of the function
6 1 3
Auto print regardless of stability
6 1 4
Auto print at stability
6 1 5
Automatic Data Output
You can stop and start automatic data output by pressing the print key.
To avoid operating errors or to ensure that data will be output continuously in the
automatic mode, you can block this function.
Code
Start/stop auto print using the
p
key
6 2 1
Auto print not stoppable
* 6 2 2
* = factory setting
2–15
