Automated Processes
Delays in production may occur when the “isoCAL” function is used in automated
processes. You can avoid such delays by setting menu code 1 15 2 “Calibration
symbol “
W
” in the display only.” In this case, you have to press the key to
activate calibration.
Printout or Record of Calibration Processes
The balance, interfaced with a data printer or a computer, creates a document
that records the date, time, serial number and model number which makes it
possible to clearly trace data to the balance that generated it. For more information,
see the section entitled “ISO/GLP-compliant Printout or Record” in the IAC
instruction manual.
Calibrating Balances When Using YDK 01, YWP 01, YWP 01U
or YWP 02 Accessories
When you use the YDK 01density determination kit or one of the special weighing
pans, YWP 01, YWP 01U or YWP 02, the balance cannot self-calibrate.
If the “
W
” symbol flashes, place the standard weighing pan on the balance and
activate the calibration function manually.
Self-Calibration with the MC1-MP8 Interface (Binary Converter)
EC-approved balance/scale models (…-0CEMS) can self-calibrate also when
menu code 9 2 3 for the MC1-MP8 interface (binary converter) has been set.
On all other models, if you select the MC1-MP8 interface, the balance cannot self-
calibrate. If this is the case, activate the calibration functions manually.
3–4
