27
C
Marking
The
C
marking affixed to the equipment indicates that the equipment
meets the requirements of the following Directive(s):
Council Directive 89/ 336/ EEC Electromagnetic compatibility (EMC)
Applicable European Standards:
Limitation of emissions:
EN 50081-1
Residential, commercial and light industry
EN 50081-2
Industrial environment
Defined immunity to interference:
EN 50082-1
Residential, commercial and light industry
EN 50082-2
Industrial environment
Important N ote:
The operator shall be responsible for any modifications to Sartorius equipment
and for any connections of cables or equipment not supplied by Sartorius
and must check and, if necessary, correct these modifications and connections.
On request, Sartorius will provide information on the minimum operating
specifications (in accordance with the Standards listed above for defined
immunity to interference).
Council Directive 73/ 23/ EEC
Electrical equipment designed for use within certain voltage limits
Applicable European Standards:
EN 60950
Safety of information technology equipment including
electrical business equipment
EN 61010
Safety requirements for electrical equipment for measurement,
control and laboratory use
Part 1: General requirements
If you use electrical equipment in installations and under ambient conditions
requiring higher safety standards, you must comply with the provisions
as specified in the applicable regulations for installation in your country.
