Operating Instructions Cubis
®
MCE
55
Operation
Procedure
t
Start the printout. To do so, press the [Print] key.
t
The GLP header is printed with the ID marking set in the menu and the
current weight value.
t
The [GLP] button appears in the operating display.
t
To exit the GLP printout: Press the [GLP] button.
y
The GLP footer is printed.
8.11
Running Applications (Examples)
8.11.1 Executing the “Toggle Between Weight Units” Function
The “Toggle between weight units” function enables a switch between the
basic unit display and up to 4 other units. The units can be set during the
weighing process and the decimal places can be adjusted.
The basic unit is displayed every time the device is started.
Procedure
t
To activate the “Toggle between weight units” function in the menu:
In the “BALANCE” menu, for the “UNIT” parameter, select the “ON”
configuration value.
t
Exit the settings menu.
y
The device boots up.
t
To select the convertible units: Press and hold down the “Toggle be-
tween weight units” button of the “Change” key.
t
The “Toggle between weight units” function menu opens.
t
Select a submenu from “Unit 1” – “Unit 4”.
t
Select the desired unit and confirm the display (available units, see
t
To set the number of display digits for the selected unit: Press
the “Confirm” button (configuration parameters, see Chapter “7.3.7
Parameters in the “Unit 1”, “Unit 2”, “Unit 3”, and “Unit 4” Function
Menus”, page 46).
t
Select the desired number of display digits and confirm the selection.
t
Exit the “Toggle between weight units” function menu.
y
The current weight value is displayed in the selected unit.
----------------------
23-Apr-2020 13:06
Sartorius
Mod. MCE32202P
Ser. no. 12345678
Ver. 09-05-00.09.01
ID CHARGE01
----------------------
L ID
G + 50.12 g
----------------------
23-Apr-2020 13:07
Summary of Contents for Cubis MCE11201S
Page 2: ......
Page 78: ...78 Operating Instructions Cubis MCE Conformity...