Example
Toggle weight units from kilograms [kg] (1st weight unit) to Troy ounces [ozt] (2nd weight unit)
Settings (changes in the factory settings required for this example):
Application program: Toggling between weight units (
2 1 2
)
Weight unit 2: pounds (
3 1 7
)
Step
Key (or instruction)
Display/Data output
1. Switch on scale
e
[On/Off/Standby] key
2. Place load on scale
(in this example: 22.95 kg)
+
229.5
kg
3. View weight in pounds [lb]
k
[Function] key
+
506.0
lb
4. Print result
p
[Print] key
ACE HARDWARE
GOETTINGEN
G + 506.0 lb
5. View weight in kilograms [kg]
k
[Function] key
+
229.5
kg
Purpose
Use this program to toggle the scale
between net and gross values.
Features
- Toggle between display of net value
and of gross value (when tare value is
in memory)
- Menu code
2 1 9
Preparation
Select “Gross/net toggling” in the oper-
ating menu as follows:
$
To activate the operating menu, switch
off the scale by pressing
e
[On/Off/
Standby]; switch the scale back on (
e
[On/Off/Standby]) and while all seg-
ments are lit, press the
)
[Tare] key
briefly.
§
Select the “Gross/net toggling” menu
item:
Press
)
[Tare],
p
[Print],
p
[Print],
)
[Tare], repeatedly as needed
> Gross/net toggling menu code:
2 1 9
§
Confirm selection: press and hold
p
[Print] key (2 sec)
> “
o
” indicates the active setting
§
Set other parameters: Press the
p
[Print] key
§
Save settings and close the menu: press
and hold the
)
[Tare] key (2 sec)
Example of a printout
Net value (
p
[Print] key):
N + 1250.0 kg
T + 150.0 kg
G# + 1400.0 kg
Gross value (
p
[Print] key):
G + 1400.0 kg
7
Gross/Net Toggling
