Entris
®
II Advanced Line Operating Instructions
15
Operating Concept
t
To modify the parameters in an application: Select
an application in Application Management .
t
Press the application
toolbar (1) .
y
The display containing
the application-
specific parameters
opens .
1
4 .8 Displays in the Operating Display
Symbol
Name
Description
[Sign] display
Indicates whether the value being displayed is positive or negative .
[Zero] display
For some conformity-assessed devices: Indicates that the device has been
zeroed .
[Percent] display
Indicates that a percentage value is being displayed .
[Computed value]
display
If the “Conversion” or “Peak hold” application is active: Indicates that a
calculated value or frozen value is being displayed .
[Net] display
Indicates that a net value is being displayed .
[Gross] display
Indicates that a gross value is being displayed .
[PC connection]
display
Indicates that a PC has been detected at the USB-PC port .
[Second display]
display
Indicates that an FTDI cable or a second display has been detected at the USB
port .
[Printer] display
Indicates that a printer has been detected at the USB port .
[USB] display
Indicates that a USB stick has been detected at the USB port .
[
Invalid
weight
value] display
Indicates that the display does
not
contain a weight value, but is instead the
calculated result of an application, e .g ., for the “Totalizing” application .
4 .9 Navigating the Menus
Procedure
t
In order to navigate
within a display, e .g .,
in the settings or
application
management: Swipe
the operating
display in the
desired direction,
e .g ., upwards or
downwards .
Summary of Contents for Entris II Advanced BCA124-1S
Page 324: ......
