18 Entris
®
II Advanced Line Operating Instructions
Operating Concept
Level 1
Level 2
Level 3
Description
Printout
Printout
Manual print
ISO / GLP printout
Only active if “Manual with stability” or
“Manual without stability” is selected in
“Printout” .
Tare after print
Manual print format
Automatic print
Auto print interval
Only active if “Printout”, “Autom . with
stability” or “Autom . without stability” is
selected in “Printout” .
Interval time
Auto print format
IDs
Set device ID
Only active if ISO / GLP printout is
activated .
Set additional ID
Batch ID function
Batch ID2 function
Sample ID function
Sample ID2 function
SBI protocol
SBI function
Manual print format
Only active if “Manual with stability” or
“Manual without stability” is selected in
“SBI function” .
Automatic print
Autom . print cancel
Only active if “Autom . with stability” or
“Autom . without stability” is selected in
“SBI function” .
Auto print interval
Interval time
Autom . print format
Connections
PC-USB
Device used
Device / Protocol
Only active if a PC is connected .
Spreadsheet
Only active if “PC spreadsheet” is
selected under “PC USB / device/
protocol” .
USB
Device used
Device / Protocol
The submenu depends on the device or
storage medium connected .
RS232 configuration
Only active if “SBI” or “xBPI” is selected
under “USB / device/protocol” .
RS232
Device / Protocol
RS232 configuration
Only active if “SBI” or “xBPI” is selected
under “RS232 / device/protocol” .
Foot switch function
Summary of Contents for Entris II Advanced BCA124-1S
Page 324: ......
