36 Entris
®
II Advanced Line Operating Instructions
System Settings
7 System Settings
7 .1
Performing System Settings
Default settings can be adjusted for the device and the
applications in order to align with the ambient
conditions and individual operating requirements . You
can change the settings at any time .
The following settings are necessary to operate the
device together with connected components:
−
Set up the communication of the connected devices
−
Set up additional components
When using the device for the first time and after
resetting the device settings, the installation assistant
starts . This assists with the following settings:
−
Set the menu language
−
Set the date and time
Procedure
t
Press the [Main menu] button .
t
To adjust settings: Open the desired menu .
t
Select and confirm the desired parameter
(parameters, see Chapter “4 .10 “Main Menu” Menu
t
Exit the menu .
7 .2 Setting the Calibration and
Adjustment
7 .2 .1
Switching the isoCAL Function On or
Off (Only Model I- x)
When using the isoCAL function, the device performs
an automatic time- and temperature-dependent
internal calibration and adjustment .
Depending on the device model, other temperature
ranges may apply for ensuring metrological data when
the isoCAL function is switched off (see Chapter “14 .1
Ambient Conditions”, page 46) .
If this relates to a conformity-assessed
device in legal metrology: In some cases it is
not
possible to switch off the isoCAL
function .
Procedure
t
Open the main menu .
t
Open the “Settings” / “Cal .-/adj . settings” / “isoCAL”
menu .
t
To set the automatic start of the isoCAL function:
Select “Automatic” setting .
t
To set the manual start of the isoCAL function: Select
the “Info, manual start” setting .
t
To switch off the isoCAL function: Select the “OFF”
setting .
7 .3 Editing User Management
7 .3 .1
Setting and Changing Admin Password
Requirements
The “Administrator” is logged into the device .
Procedure
t
Open the “Settings” / “User management” / “Set
admin password” menu .
t
Press the [ . . .] button .
y
The input screen for the admin password is displayed .
t
Enter the desired password in the input field and
confirm with the [Confirm] button .
y
The input screen for the user password is displayed
again .
t
Enter the password in the input field a second time
and confirm with the [Confirm] button .
t
Press the [Confirm] button .
Summary of Contents for Entris II Advanced BCA124-1S
Page 324: ......
