Entris
®
II Advanced Line Operating Instructions
7
Safety Instructions
1 .4 .2 Other Symbols
t
Required action: Describes actions that
must be carried out .
y
Result: Describes the result of the actions
carried out .
[ ]
Text inside brackets refers to control and
display items .
[ ]
Text inside brackets indicates status,
warning, and error messages .
Indicates information for legal metrology for
conformity-assessed (verified) devices .
Conformity-assessed devices are also
referred to as “verified” in these instructions .
Figures on the Operating Display
The figures on the operating display of the device may
differ from those in these instructions .
2 Safety Instructions
2 .1
Intended Use
The device is a high-resolution balance, which can be
used indoors, e .g . in industrial areas . The device was
developed for the accurate determination of the mass of
materials in liquid, paste, powder, or solid form .
Appropriate containers must be used for loading each
type of material .
The device is exclusively designed for use according to
these instructions . Any further use beyond this is
considered
improper
.
If the device is used
improperly
: The device’s protective
systems may be impaired . This can lead to unforeseeable
personal injury or property damage .
Operating Conditions for the Device
Do
not
use the device in potentially explosive
environments . Only use the device indoors .
The device may only be used with the equipment and
under the operating conditions described in the
Technical Data section of these instructions .
2 .1 .1
Modifications to the Device
If the device is modified, for example by attaching extra
components: The safety of the device may be impaired
or the device compliance may lose its validity .
If you have any queries regarding modifications to the
device, contact Sartorius .
2 .1 .2 Device Repairs and Maintenance
Specialist knowledge about the device is required in
order to carry out repair and maintenance work on it . If
the device is
not
repaired or serviced by a specialist: The
safety of the device may be impaired or the test marks
may lose their validity .
We recommend that any repair work, even that not
covered by the warranty, is carried out by Sartorius
Service or after consulting with Sartorius Service .
Only the maintenance tasks described in these
instructions should be carried out . For maintenance
tasks that need to be carried out by Sartorius Service,
contact Sartorius Service.
2 .2 Personnel Qualification
If individuals who do
not
have sufficient knowledge on
the safe handling of the device carry out work on the
device: Those individuals may injure themselves or other
people nearby .
t
Ensure that all persons working on the device
possess the necessary knowledge and qualifications
(for description, see Chapter “1 .3 Target Groups”,
page 6) .
t
If a particular qualification is required for the actions
described: These actions must be performed by the
required target group .
t
If
no
qualification is required for the actions
described: Have these actions carried out by the
“user” target group .
Summary of Contents for Entris II Advanced BCA124-1S
Page 324: ......
