32 Entris
®
II Advanced Line Operating Instructions
Operating Concept
Parameters
Settings
Explanation
Optimize
Automatic*
Activates the automatic reference sample updating . The average piece weight is
recalculated every time the reference sample is updated automatically . The basis
for the calculation is increased every time a new sample is placed . This increases
the counting accuracy of the reference and with it the result .
Off
Deactivates automatic reference sample updating .
* Factory setting
Parameters of the “Pipette Test” Application
Parameters
Settings
Explanation
component
On*
Activates the component printout .
Off
Deactivates the component printout .
Apply
Automatic
Automatically saves the weight value .
Manual*
Saves the weight value after manual confirmation .
* Factory setting
4 .11 .19 Unit Toggling Parameters “Unit / Accuracy”
Parameters
Settings
Explanation
Unit
g*, kg, ct, lb,oz,
ozt, tlh, tlt,
GN, dwt, mg, /
lb, tlc, mom,
Kt, tol, bat,
MS, N
Defines the unit of the weight value .
Accuracy
All digits on
Shows all available decimal places .
Last digit off
Does
not
show the last available decimal place .
* Factory setting
Summary of Contents for Entris II Advanced BCA124-1S
Page 324: ......
