Entris
®
II Advanced Line Operating Instructions
9
Device Description
3 Device Description
3 .1
Device Overview
1
4
6
5
3
2
Fig . 1: Precision balance (front view)
Pos. Name
Description
1
Weighing pan
For placing the sample
on the balance
2
Shock absorber
3
Manufacturer’s ID
label
Attached to the rear of
the device
4
Frame draft shield
5
Control unit
6
Leveling foot
Used to level the
balance, is manually
adjustable
3 .2 Device Connections
1
2
5
6
3
4
Fig . 2: Precision balance (rear view)
Pos. Name
Description
1
Access switch
Protects the device from
changes to the device
settings . Is sealed for
conformity-assessed
devices .
2
Power supply
Connection for power
supply to the device
3
PC-USB
USB-C connection, for
connection to a PC
4
USB
USB-C connection, for
connection to a printer, USB
stick, FTDI cable, or a
second display .
5
RS232
connection
9-pin, for connection to a
printer, PC, or a second
display
6
Slot
For attaching an anti-theft
device, e .g ., a Kensington
lock
3 .3 Conformity-assessed Devices
Some settings of conformity-assessed models are
protected against user changes, e .g ., external calibration
or the “Safety level” in the “Weighing” menu . This
measure is intended to ensure the suitability of the
devices for use in legal metrology .
Summary of Contents for Entris II Advanced BCA124-1S
Page 324: ......
