Sartorius Entris II, Technical Notes

Entris

®

 II 

Description of the Interface

Technical Note 

Your balance is equipped with a 
serial RS232 interface port for 
connection to a computer or 
other peripheral device.
You can connect a computer to 
change, start and/or monitor the 
functions of the balance and the 
application programs.

Features

 -

Type of interface: Serial interface

 -

Operating mode: Full duplex

 -

Standard: RS-232

 -

Transmission rates: 600, 1200, 2400, 4800, 9600, 19200, 
38400, 57600 and 115200 baud

 -

Parity: odd, even, none

 -

Number of data bits: 7 or 8 bits

 -

Character format: 
1 start bit, 7-bit ASCII, parity, 1 Stop bit

 -

Handshake:  
For 2-wire interface: Software 
For 4-wire interface: Hardware (CTS/RTS)

 -

Data output format of the balance:  
16 or 22 characters

Factory Settings

-

Transmission rate

: 

9600

 baud (Code 2.1.2.7.)

 -

Parity: 

ODD

 (Code 2.1.3.3.)

 -

Stop bits: 

1 STOP BIT

 (Code 2.1.4.1.)

 -

Handshake: 

HRDWARE.

 Hardware (Code 2.1.5.2.)

 -

Operating mode: 

SBI

 (Code 2.1.1.1.)

 -

Printing: 

IND.NO. 

Manual without stability (Code 3.1.1.1.)

Preparation

See “Pin Assignments” and “Pin Assignment Chart”