Counting
A
Purpose
With the Counting program you can
determine the number of pieces of
approximately equal weight.
You can use this application program
in combination with a program chosen
from Application 2 (checkweighing,
time-controlled functions) and one from
Application3 (totalizing, formulation,
statistics) as well as with the extra func-
tions.
Available Features
– Optional scale configuration in Setup
for automatically initializing this
application and loading the most recent
reference sample quantity “nRef” and
average piece weight “wRef” when
you switch on the scale (this is the
automatic setting when the scale
is initialized; Setup menu: Application
parameters: Auto-start app. when
power goes on: On)
– Reference sample quantity “nRef”
entered manually
– Average piece weight “wRef” entered
manually
– Storage of the current weight value for
the preset reference sample quantity
“nRef”, to be loaded when the Count-
ing program is initialized
– Setting the accuracy when the reference
sample weight “wRef” is stored for
calculating a piece count
– Automatic output of the quantity and
sample weight via the data interface
port after initialization or reference
sample updating while running the
Counting program (Select Setup:
Printout: Application-defined: Auto
print upon initialization: All values)
– Toggling between piece count and
weight value by pressing the
Count.
or
Weigh.
soft key
– Toggling between counting and addi-
tional applications using the
D
key
(for example, checkweighing)
Factory Settings
Accuracy when calculating piece weight:
Display accuracy
Reference sample updating:
Automatic
Soft Key Functions
nRef
Store value input as reference
sample quantity
wRef
Store input value as reference
sample weight
Opt.
Reference updating criteria
met; reference updating can
be performed
Count.
Toggle to the Counting
application
Weigh.
Toggle to the weighing mode
Start
Store current weight value for
the preselected piece count
55
