Calculation
D
Purpose
With this application program you can
calculate a weight value using an alge-
braic equation. This can be used, for
example, to determine the gsm weight
(grams per square meter) of paper.
You can use the “Calculation”
application in combination with
a program chosen from Application 2
(checkweighing, time-controlled
functions) and one from Application 3
(totalizing, formulation, statistics) as
well as the extra functions.
Available Features
– You can store an equation and
configure the Setup menu to initialize
this program automatically with the
stored equation (Setup: App: Basic
settings : Auto start upon initialization:
On)
– The
o
symbol is displayed to indicate
a calculated vale. The equation used is
displayed in the text line
– If no equation was entered, the weight
value is displayed
– Toggle between the weight readout,
equation input and display of the cal-
culated result by pressing the corre-
sponding soft keys (or press
c
to
toggle between weight and calculated
value)
– The are four operators (+, –, *, /) and
one factor (weight value) available
when you enter an equation
– Max. equation length: 28 characters
– Pressing
c
will delete either the
equation or the last character entered,
depending on the configuration in the
Setup menu (Setup: Device: Keys: CF
function for input: Delete last charac-
ter)
– The calculated result is displayed
with the number of decimal places
configured in the Setup menu. Not all
decimal places are displayed if the result
is longer than the display allows.
If there are more digits before the
decimal point than the display can
show, an error message is displayed.
– The equation is stored in non-volatile
memory
Factory Settings
Decimal places in calculated result:
2 decimal places
Soft Key Functions
Equat.
Toggle to equation
+
Enter an addition operator
in the equation
-
Enter a subtraction
operator in the equation
*
Enter a multiplication
operator in the equation
/
Enter a division operator in
the equation
Weight
Enter a weight value in the
equation
Start
Start calculation
Weigh.
Toggle to the weighing
mode
Printout for Calculation
The calculation result is printed.
Res
+
693.88 o
Res: Result of calculation with equation
Additional Functions
In addition to the functions for:
– alphanumeric input,
– taring (not during alphanumeric input),
– printing,
you can also access the following
functions from this application:
Calibration/Adjustment
●
Press the
isoTST
soft key
> See “Calibration/Adjustment”
for further instructions
Toggling to the Next Application
●
Press
D
/[TOGGLE]
> See the section on the corresponding
application program for further
instructions
Setup (setting parameters)
●
Press
H
> See “Configuration”
for further instructions
Turning Off the Scale
●
Press
e
>
The scale shuts off
70
Preparation
●
Turn on the scale: press
e
> Sartorius logo is displayed
●
Select the Calculation application program in the Setup menu: press
H
●
Select the
Application parameters
: press the
q
soft key 2
+
,
then the
O
soft key once
●
Select
Application 1 (basic settings)
: press the
O
soft key
●
Select
Calculation
: press the
Q
or
q
soft key, repeatedly, if necessary
●
Confirm
Calculation
: press the
O
soft key
Calculation
Decimal places
None
in calculated result
1 decimal place
ο
2 decimal places
3 decimal places
4 decimal places
5 decimal places
6 decimal places
ο
= factory setting
see also the “Application Parameters (Overview)” in the chapter entitled
“Configuration”
●
Save settings and exit the Setup menu: press the
oo
soft key
