Formulation
M
Preparation
●
Turn on the scale: press
e
> Sartorius logo is displayed
●
Select the Formulation application program in the Setup menu: press
H
●
Select
Application parameters
: press the
q
soft key 2
+
,
then the
O
soft key once
●
Select
Application 3 (data records)
: press the
q
soft key 2
+
,
then the
O
soft key once
●
Select
Formulation
: press the
Q
or the
q
soft key
●
Select
Formulation
: press the
O
soft key
Formulation
Automatic
ο
Off
storage
On, first value at stability
Minimum load for
None
automatic storage:
10 digits
ο
20 digits
50 digits
100 digits
200 digits
500 digits
1000 digits
Source of data for
ο
Application 1
auto storage
Application 2
Evaluated values
ο
Net
Calculated
Net + calculated
Evaluation mode,
ο
Intermediate evaluation, print
MR function
Final evaluation, print
Printout of individual
No
components
ο
Yes
ο
= factory setting
see also the “Application Parameters (Overview)” in the chapter entitled “Configuration”
●
Save settings and exit the Setup menu: press the
oo
soft key
Additional Functions
In addition to the functions for:
– alphanumeric input,
– taring (not during alphanumeric input),
– printing,
you can also access the following
functions from this application:
Calibration/Adjustment
●
Press the
isoTST
soft key
> See “Calibration/Adjustment”
for further instructions
Toggling to Another Application
●
Press
D
> See the section on the corresponding
application program for further
instructions
Setup (Setting Parameters)
●
Press
H
> See “Configuration” for further
instructions
Turning Off the Scale
●
Press
e
> The scale shuts off
84
