89
Practical Example
Totalize counted pieces and print out statistics
Settings (changes in the factory settings required for this example):
Setup: Application parameters: Application 1: Counting: Average piece weight updating: Manual
Setup: Application parameters: Application 3: Statistics: Evaluated values: Calculated
Setup: Application parameters: Application 3: Statistics: Evaluation mode, MR function: Final evaluation, d print
Step
Key (or instruction)
Display/Output
1. Turn on the scale and configure
e
the settings as indicated above
2. Delete old statistics data,
c
if necessary
3. Tare the scale
t
4. Toggle to Application 1: Counting
D
5. Place the displayed number of parts
Place parts to be counted
on the scale (here: 10 pcs)
on the scale
6. Initialize the Counting application
Start
soft key
7. Remove the reference sample
Unload the scale
quantity and toggle to Statistics
D
8. Place a number of parts on the
Place parts on the scale
scale (here: 35 pcs)
isoTST
6
isoTST
6
isoTST
6
isoTST
6
nRef 10 pcs
wRef 10.62600 g
isoTST
6
isoTST
6
