Description of the Keys
e
Key
On/off switch
Switches the display on/off.
The balance remains in the standby
mode.
M
Key
Settings for Configuring
the Balance
– Access to the Setup menu
– Stores settings and exits Setup menu
You can select:
info
Display basic information about the
equipment (e.g., model name, serial no.,
software version)
menu
Balance operating menu with plain
English prompts for adapting the
balance to individual requirements
input
For entering identifying information
(e.g., balance ID)
c
Key
Clear
This key is generally used to
interrupt/cancel functions:
– Delete keyboard input and clear memory
– Interrupt calibration/adjustment
routines
– Return application program to previous
status
q
Key
Calibration/Adjustment
Press this key to select and start
calibration/adjustment functions.
w
Key
Toggle
This key toggles the display readout
between a weight and a calculated
value (counting, readout in percent,
calculated result)
v
Key
Start an Application
Further instructions on running the
applications when this key is pressed are
contained in the chapter entitled “Oper-
ating the Balance;” refer to the section
pertaining to the particular
program.
x y Y X
Keys
For moving around within the parameter
submenus for Info, Menu and Input in
the Setup menu.
t
Keys
Tare
Two large keys for initiating the tare
function. Ideally situated for both left-
handed and right-handed operation.
Sets the readout to zero. With balances
that have the “PolyRange” weighing
range structure, the fine range is avail-
able when this key is pressed.
a
Key
Press this key to enter alphabetic
characters and/or special characters
(*, /, space, etc.).
1 2
…
9 0
Keys
For numeric input
.
Key
Define the decimal point position
p
Key
Data Output
Press this key to output data via the
interface to a Sartorius Data Printer
or a computer.
73
