§
Screw the eye bolts to the left longitudinal strut from below
using screws M6
+
20, and fix the measurement cable to the eye
bolts with a cable clip.
§
Press in the plastic impact cap (19) to protect the flooring.
§
When lifting up and down for the first time, ensure that the
measurement cable is not damaged or squashed.
§
Mount the grips to the scale platform:
Drill holes on the front side and secure the grips using screws
and nuts.
§
Mount the drive-on
ramp:
Attach the drive-on
ramp on the right
and left side of the
equipment.
10
19
