8
Getting Stared
Unpacking the Weighing Platform
—
Remove the weighing platform and separate load plate from the
packaging
—
Remove the plastic bags, packaging strips and foam material
Transport Locking Devices
Set up the weighing platform in the vicinity of your work area, remove the
load plate (1), and remove the red plastic caps.
Loosen the fastening screws on the retainer plates using the Allen wrench
(key) that is supplied with the weighing platform. Slide the retainer plates in
the direction of the arrows.
Afterwards, retighten the retainer plates so that they are not in contact with
the pins.
Use the Allen wrench (key) to remove screw no. 1, and loosen screw no. 2.
Turn the red color-coded transport locking device by 90° in the direction of
the arrow, and refasten the transport locking device.
Important Note
Make sure to retighten all screws that belong to the transport locking
devices
Place the load plate on the platform.