Connecting Model LE26P, LE225D(-0CE) to the
Electronics Box
– Plug the male connector on the cable into the
female connector on the electronics box
!
Do not exchange the balance or electronics box with
a component of a different balance!
Balances with a 3-Sided Draft Shield
§
Place draft shield on the balance with the cover
opening in front on the right
§
Turn the draft shield clockwise until it is firmly in
position
§
Place components inside the chamber in the
following order:
– Base plate
– Weighing pan receptor
– Weighing pan
$
To access the weighing chamber from the side,
remove side panels as desired
6
1
2
