4
Warnings and Safety Precautions
This scale meets the guidelines and stan-
dards governing electronic equipment,
electromagnetic compatibility and the
stipulated safety standards. Improper use
or handling can result in property dam-
age and/or personal injury. To prevent
damage to the equipment, read these
operating instructions
thoroughly before using your scale. Keep
these instructions in a safe place.
– Do not expose the scale to extreme tem-
peratures, aggressive chemical vapors,
moisture, shocks and vibrations
– The display values can be impacted when
subjected to extreme electromagnetic
influence. When the negative influence
has subsided, the scale will again be fully
operational.
– The equipment must be used indoors
– The scale may not be operated in
hazardous/ EX Zone areas
– To ensure safety, disconnect the equip-
ment from power before connecting or
disconnecting the cables or electronic
peripheral devices
– If you use cables purchased from
another manufacturer, check the pin
assignments in the cable against those
specified by Sartorius before connecting
the cable to Sartorius equipment, and
disconnect any wires that are assigned
differently. The operator shall be solely
responsible for any damage or injuries
that occur when using cables not
supplied by Sartorius.
– When connecting the scale to the power
supply, the laws valid in your country
must be observed. If you should have any
questions, please contact your supplier or
Sartorius Customer Service for informa-
tion on the legal regulations applicable in
your country. The scale must be installed
by a certified technician to avoid forfei-
ture of all claims under the manufacturer’s
warranty.
– If you see any indication that the scale
cannot be operated safely (for example,
due to damage), turn it off and lock it in
a secure place or otherwise prevent use of
the equipment for the time being. Adhere
to the accident prevention regulations
and inform the operators, accordingly.
– Always make sure the equipment is
disconnected from AC power before
performing any installation, cleaning,
maintenance or repair work on the scale.
To avoid forfeiture of all claims under the
manufacturer’s warranty, all repair and
maintenance work must be performed by
authorized Sartorius service technicians.
– All other cables connecting the weighing
equipment and peripheral devices, as well
as the wiring inside the devices, are cased
in PVC materials. Chemicals that corrode
these materials must be kept away from
these cables.
– Never use a hammer to close the lid of a
paint can while it is still on the weighing
pan. Otherwise, you will damage the
weighing system.
Summary of Contents for PMA 7501-000G
Page 23: ...23...
