7
Operation
Scale Functions
Center an empty paint can on the load plate.
Press the
U
key (zero/tare; 3). The display shows
0.0
g.
Pour the first component of your formula into the can and
read off the weight when the stability symbol (in this
example,
“g”
) is displayed.
Add the other components up to the desired weight
(formula).
Remove the filled paint can from the load plate.
Never use a hammer to close a paint can while is it still on
the load plate, as this will damage the weighing system.
Press the
Q
key (19) to
switch on the scale.
A self-test runs automatically,
at the end of which the
readout shows
0.0
g.
If a different value is
displayed, press
U
key
to tare the scale.
