12
Operating Instructions PMA 35001-X
Operation
Operation
Press the
Q
key to turn
on the scale.
Once the scale has been
turned on, it will run an
automatic self-test. This
ends when the display
shows 0.0 g.
If a different value is
displayed: Tare the
scale using the
U
key (Zero/Tare).
Weighing
Place an empty paint can on the load plate.
Press the
U
key (Zero/Tare) (3).
The display shows “
0.0
g.” Pour the first component of your formula into the can
and read off the weight when the stability symbol (in this example) “
g
" is displayed.
Add the other components up to the desired weight (formula).
Remove the filled paint can from the load plate.
Never use a hammer to close a paint can while is it still on the load plate, as this
will damage the weighing system.
The weighing system will get damaged!
Summary of Contents for PMA.Power Series
