Operation
Weighing with One Decimal Place
Place an empty paint can on the weighing pan.
Press the
U
key (5). The display shows “
0.0 g.
”
Pour in the first component, and read off the weight as
soon as the stability symbol appears; in this case, “
g.
”
Pour in additional components until the desired weight
of your formula is reached.
Remove the filled paint can from the weighing pan.
Never use a hammer to close the lid of a paint can
while it is still on the weighing pan.
Otherwise, you will damage the weighing system.
8
Turn on the scale using the
Q
key (2).
After the scale has been
turned on, it will automati-
cally run a self-test. At the
end of this test, 0.0 g is
displayed.
If a different readout is dis-
played, zero or tare the scale
using the
U
key (5).
