5
SARTORIUS QC - Scales
Scale Operating Menu
Accessing the Scale Operating Menu and Changing Settings
Press
e
to switch the scale off and back on again.
While all segments are displayed (segment check), briefly press the
=
key.
A “1” is displayed.
Note:
If you wish to change the settings in the scale operating menu, the menu
access switch must be open. The menu access switch is not accessible
when the scale housing is closed; it is located on the solder side of the main
PCB. To access this switch, you need to open the display unit. The factory
setting of the menu access switch is “accessible” (open).
Selecting a Code:
Press
u
to change the number, in series (1, 2, 3 ... 9, 1).
Press
p
to move from the 1st to the 2nd, 2nd to 3rd and, if desired, back
to the 1st position of the 3-part menu code.
Changing a Code:
Press
=
to confirm the desired setting; the “°” symbol is displayed next to
the code when it is set.
Exiting the Menu with or without Saving a New Setting:
To exit the scale operating menu, first move the cursor to the first position of
the code.
If you wish to save the changes you have made, press the
=
key for at
least 1.5 seconds to exit the menu.
If you do not wish to save any changes, press the
e
key to exit the menu.
Summary of Contents for QC34EDE-S
Page 2: ...2...
