19
Changing the "Under" Limit
Depending on the menu code setting in the scale operat-
ing program, you can enter the under limit either by stor-
ing the weight of a sample on the platform or by numerical
entry.
The following menu codes can be set in the scale operat-
ing program:
Code
1 1 1
Target weight by loading sample; retain same
setting for over/under tolerance limits
1 1 2
Target weight by loading sample;
over/under limits by loading underweight and
overweight samples
1 1 3
Target weight by loading sample; over/under
limits by numeric entries using keys
1 1 4
Not assigned
1 1 5
Target weight by numeric entry using keys;
retain same setting for over/under tolerance
limits
1 1 6
Target weight by numeric entry using keys;
over/under limits by loading underweight and
overweight samples
1 1 7
Target weight by numeric entry using keys;
over/under limits by numeric entries using keys
How to enter the under limit using an
underweight sample:
—
Clear the weighing platform
—
Press the key to tare the scale
—
Place the sample on the platform and
—
Press the
key to store the weight.
How to enter a numeric value for the under limit:
The analog range for the under limit will flash.
Starting with the limit previously set, enter the "under" limit
as a deviation from the target weight.
—
Use the keys labeled and
to enter the limit.
—
Press the
key to store the numeric under-
weight you have just entered; the program will
automatically change to the next parameter.
Summary of Contents for TS 12
Page 39: ......
