VIS1X
Operating Instructions
29
Operation
6.4.1 Setting a Conversion Factor
t
Select the factor (1) in the weighing display.
y
The [Conversion factor] menu opens.
t
Use the keys (2) to adjust the conversion factor gradually.
− Under 1.0: Interval 0.01 (up to 0.10)
− Over 1.0: Interval 0.1 (up to 6.00)
t
Alternatively, enter the conversion factor directly (3).
t
Select
l
to confirm (4).
t
Select
p
(1) to cancel the entry.
6.4.2 Toggle between the Calculated Value and Gross Value
The figure shows the display of the calculated value (1).
t
Select [Res] (1) in order to display the gross value.
The figure shows the display of the gross value [G] (1).
t
Select [G] (1) in order to display the calculated value.
6.4.3 Mixing a Formula with Factor Calculation
The factor calculation enables you to weigh in amounts that are smaller or larger
than that of your basic formula for a specific paint color (e.g., 250 ml of a 1 l
formula). The conversion factor can be set between 0.1 and 6.0.
t
Select the [Mixing w/o job] button in the Sartorius menu (1).
y
The [Weighing] application appears.
0
Factor
1.00
START
G
g
Max. 7500 g d=0.1 g
+
249.2
1
Conversion factor
Please adjust conversion factor.
1.00
1
2
2
3
4
1
0
Factor
0.50
START
Res
o
Max. 7500 g d=0.1 g
+
200.2
F 0.50
1
0
Factor
0.50
START
G
g
Max. 7500 g d=0.1 g
+
100.1
F 0.50
Main job information
2nd job information
Mixing w/o job
1
