50
VIS1X
Operating Instructions
Storage and Shipping
12 Storage and Shipping
12.1 Storage
Procedure
t
If the device is in operation:
t
Decommission the device.
t
Clean the device.
t
Store the device according to the ambient conditions (see Chapter “15 Technical
Data”, page 53).
12.2 Shipping-related Tasks/Returns
You can send defective devices or parts back to Sartorius. Returned devices must be
clean, decontaminated, and packed in their original packaging.
Transport damage as well as measures for subsequent cleaning and disinfection of
the device or parts by Sartorius shall be charged to sender.
WARNING
Risk of injury due to contaminated equipment!
Devices contaminated with hazardous materials (NBC contamination) will
not
be
accepted for repair or disposal.
t
Observe the Information on Decontamination (see Chapter 13.1, page 51).
Procedure
t
Decommission the device.
t
Fill out the Decontamination Declaration. Use the forms available on our website
(www.sartorius.com).
t
Enclose the Decontamination Declaration with the delivery documents.
The recipient must be able to inspect the completed Decontamination
Declaration before removing the device from the packaging.
t
Pack the device and its parts in their original packaging.
t
Return the device to Sartorius Service. The service addresses for returns can be
found on our website (www.sartorius.com).
