6
VIS1X
Operating Instructions
Safety Instructions
1.3.2 Other Symbols
t
Required action: Describes actions which must be carried out.
y
Result: Describes the result of the actions carried out.
[ ]
Text inside brackets refers to control and display elements.
This symbol provides information for the sale of scales verified for use in
legal metrology.
In the following, the term “verified” is used to mean “verified for use in
legal metrology” or “conformity-assessed.”
Figures on the Operating Display
The figures in these instructions are based on “standard” scales. On verified scales,
some displays and reports may deviate slightly from the figures. Where this is
significant for operation, the differences will be explained in the text.
2 Safety Instructions
2.1 Intended Use
This scale is used for mixing colors and paints. The scale is always connected to the
ex-link converter YCO16-Z installed outside of the potentially explosive area at
all times using only the link cable supplied. The scale can be used in potentially
explosive areas in Zone 2. Appropriate containers must be used for loading each
type of material.
The scale is controlled via the operating display. Formulas can be written into the
scale using a web application via a tablet, smartphone or PC. The PC is connected to
the ex-link converter installed outside of the potentially explosive area either via a
network or directly via an Ethernet cable.
The device may only be used indoors.
Only use the device with the equipment and under the operating conditions
described in the Specifications. You may
not
modify the device or make any
technical changes.
These instructions are part of the device. The device is intended exclusively for use
in accordance with these instructions.
Any further use beyond this is considered
improper
. If the device is not used
properly: The protective systems of the device may be impaired. This can lead to
personal injury and property damage.
