20
SAS 1SF - Twin Screw Feeder Assy & Control - APRIL 2020
SERVICING OVERVIEW
WARNING
: check periodically all the components that wear with the time.
WARNING
:
check regularly the electrical, electronic devices.
Following, the deadlines of the periodic maintenance operations will be indicated.
Every 2 years:
•
Replace every component subject to wear.
The frequency of the above mentioned operations depends on the equipment type of use
and the working conditions (transported material, working environment etc..).
For onerous environments and/or transported material that are dusty or sandy (for this
reason highly wearing) it is suggested to increase the frequency of the operations.
For any questions about specific use of the machine please contact our technical office.
Extraordinary maintenance refers to repair and replacement operations of one or more
machine Key
components that are necessary only after a long time, and it doesn’t change
the technical characteristics of the machine. The extraordinary maintenance must be
performed by the manufacturer or by qualified personnel.
WARNING
: in any case all changes and updates must be discussed and agreed
with the original manufacturer, and every project that modifies the original one
dispense the manufacturer from any responsibilities about damages to people or
things.
WARNING:
Spice Application Systems Ltd
declines every responsibility
coming from the non-fulfilment of the above mentioned instructions
All the operations that have to be performed that are indispensable for keeping the
optimal efficiency of the machine.
