2
SAS 1SF - Twin Screw Feeder Assy & Control - APRIL 2020
WARNINGS OVERVIEW
SAFETY GUIDELINES
The person in charge of the manufacturing work area should ensure that
personnel are properly trained in the use of this equipment. The safety rules
which follow should be fully understood and applied at all times.
For more information, consult the local safety rules. In addition, the following
precautions must be observed.
WARNING!
Failure to observe the safety precautions contained within this manual
could result in operational difficulties of the equipment and potential to create
unsafe conditions.
The removing of the protective equipment and/ or modifying the machine without
previous authorization by the manufacturer is strictly forbidden.
•
Use only spare parts, accessories or materials that are original or instead
item and materials provided by the manufacturer.
•
Do not put or approach the hands and/or other objects near the movement
blocks in order to avoid crushing risks.
•
The installation and even the partial use of the equipment are forbidden to the
unauthorized operators.
•
It is compulsory the grounding of the metallic box.
•
Any use of the equipment different from the intended one is strictly forbidden.
•
Read carefully the warning and danger plates on the equipment.
•
It is forbidden to remove the warning and danger plates on the equipment.
•
It is forbidden to start up the equipment before the installation is declared
compliant to the directive 2004/108/EC.
•
The installer has to provide the suitable devices for the products that are
dangerous and harmful by contact and/or by inhalation, flammable, explosive
and dangerous from a bacterial and/or viral point of view. Concerning this
part the installer has to set up all the protections in order to avoid damages to
things or people if breakings with consequent fall of pieces from the
equipment occurs.
•
Do not start the machine without having the complete knowledge about the
functioning.
•
Do not clean, make maintenance, substitute or adjust machine components if
the voltage in on.
•
The people responsible for the use of the machine have to check and provide
the correct use of the equipment according to the requests, the regulations,
the laws and the European community Standards.
