3
SAS 1SF - Twin Screw Feeder Assy & Control - APRIL 2020
WARNINGS OVERVIEW
•
Notes for screw feeders assigned at the transport of food, pharmaceutical
and zoo-technical products:
o
Periodically clean the screw feeders; the cleaning frequency depends
on the type of product processed and on the nature of the system. It
must be fixed by the people responsible for the use of the machine.
o
Great attention must be paid to the cleaning of the dispenser body, the
dispensing screw, the protections, etc.
o
If it is necessary to clean with other products that are difficult or
impossible to list because of their nature, it is necessary that the
customer previously informs our technical office.
IT IS STRICTLY FORBIDDEN
the use of the equipment if some anomalies occurs
(excessive noise, vibrations, etc).
WARNING:
The failure of the safety standards observance and advices for corrected
machine maintenance or the possible tampering of safety standard relieves
Spice Application Systems Ltd
and their suppliers in case of responsibility of
fire, damage or plant/line/machine malfunctioning.
INAPPROPRIATE USE
An inappropriate use of the machine may have serious risks for people and/or
the environment as well as causing damages to the equipment itself.
The equipment must be used only for the purposes specifically expected by the
manufacturer:
•
Do not use the equipment if it’s not correctly installed, do not start it up if
the engine group is not mechanically fixed to the rest of the machine.
•
Do not use the equipment if the rotating part are not intact or perfectly
cleaned. In this case the dosing power and the capacity are not
guaranteed.
•
Do not use the screw feeders with a screw exceeding the length of the
exhaust pipe.
•
Do not use the equipment as a supporting point even if it is not working.
There is the danger to fall or to damage the machine itself.
•
Do not work on the electric engine or on any other electric component if
the power supply is on, in order to avoid electrocution.
•
Do not wash the machine with a water jet. The electric motor is not
shielded from dust and water.
•
Do not use products that do not have a clear composition, chemically
aggressive, flammable or dangerous for the machine or the operator
•
Do not operate the machine outside, exposed to weather and sudden
changes of temperature.
