5.
Not suitable for persons with beard or other facial hair which may reduce the efficiency of
respirator.
6.
The use and reuse of this respirator is subject to consideration of hygiene damage and
increased breathing resistance. For dirty workplaces, service time should not be extended
beyond 8 total hours of use.
7.
Store the respirators in cool place. Avoid direct exposure of sunlight during storage as the
filter media in this respirator can be degraded by extended exposure to direct sunlight.
8.
S - Special or critical User Instructions: The model 8722 filtering facepiece respirator has
been manufactured by JINFUYU INDUSTRIAL CO. LTD. For SAS SAFETY CORP
under TC-84A-7721.
ASBESTOS WARNING: DO NOT use this respirator for protection against the inhalation
of asbestos.
SILICA WARNING: SAS Safety respiratory products are not designed to protect you
from the inhalation of silica while performing, observing, or working in or around
sandblasting operations. DO NOT enter any potential exposure area until you know the
nature and concentration of the atmosphere and are wearing appropriate respiratory and
other protection for that exposure situation.
Instructions for the 8722 N95
Maintenance free respirator
Fitting Instructions
The respirator user must be fit tested according to OSHA regulation 29 CFR 1910.134.
1.
Hold the respirator in one hand with the nose area at your fingertips, allowing the headbands
to hang below your hand.
2.
Press the respirator against your face with the nose foam on the bridge of your nose.
3.
Place the top band high on the back of your head. Move the bottom band over your head and
position it below your ears.
4.
Test the fit. Cup both hands over the respirator and inhale vigorously. If no negative
pressure is felt inside the respirator, readjust the position of the respirator according to steps
#2, #3, and #4 till get a better fit.
