- 21 -
exceeded, cutting off power supply to blow-in fan and fuel feeder is executed.
FUEL BUNKER PROTECTION
A controller is additionally protected against
flames getting back into fuel
bunker (hopper). Boiler is provided with sensor measuring temperature around
hopper’s vicinity. If temperature raise is significant (flames back) an alarm is
launched and fuel is pushed out into combustion chamber.
SAFETY VALVE
Boiler is provided with safety valve being an additional protection against
pressure raise due to water freezing in part of installation, especially in the pressure
vessel.
Commercially delivered boilers are assembled and supplied with complete set
of tools for maintenance together with the technical-start-up documentation.
If disassembling of the feeder is required, please be aware, that successive
assembling of the device may only be carried out by authorized team!
Before connecting a boiler to a heating installation, make check if all boiler’s
components are in good working condition, and that the boiler is fully equipped.
NOTE: Boilers need to be transported in the vertical position!
In order to recycle the boiler worn device deliver to specialized recycling unit,
according to detailed regulations being in force in the country of destination.
1. Manufacturer grants warranty for proper functioning of the heating boiler SAS
MULTI, what is confirmed with the stamp of factory.
2. Manufacturer grants warranty for the period covering
the boiler installed and
operated according to all terms and recommendations included to Technical -
Start-Up Documentation (TSD).
3. A buyer gets together with terms of warranty hereby Technical-Start-Up-
Documentation (TSD), which is laid down rules for the proper operation and safe
exploitation of the heating boiler. Hereby documentation (TSD) must be reading
careful and it is obligatory.
8. TERMS OF DELIVERY
9. BOILER’S RECYCLING
10. TERMS OF WARRANTY
