OIL-LESS AIR PUMP
OPERATING INSTRUCTIONS
MODEL # 9805-00, 9810-00, 9820-00 & 9840-00
-- FOR RESPIRATOR AND AIR-LINE ASSEMBLIES,
PRESSURE RELIEF VALVE IS FACTORY SET AT MINIMUM 4.0 PSI
FOR USE WITH 50 TO 100 FOOT AIR-SUPPLY LINE.
DO NOT
CLOSE OFF PRESSURE RELIEF WHERE NO AIR CAN ESCAPE.
IMPORTANT
-- FOR RESPIRATOR SYSTEMS OTHER THAN SAS SAFETY CORP.
-- FOR RESPIRATOR AIR-LINE SYSTEMS OTHER THAN SAS. ADJUST
PRESSURE RELIEF VALVE IF NECESSARY.
-- USE PRESSURE RELIEF VALVE AS A ADJUSTMENT DEVICE.
DELIBERATELY "BLEED OFF" AIR TO ACHIEVE DESIRED GAUGE
READING.
-- GAUGE READING SHOULD CONFORM TO MSHA/NIOSH APPROVED
MINIMUMS FOR EACH SPECIFIC RESPIRATOR MODE MANUFACTURER'S
OWNER'S MANUALS OR INSTRUCTIONS WILL SPECIFY THESE
PRESSURE RANGES.
-- COUPLING MAY NEED TO BE REPLACED ON PUMP IF AIR-LINE
CONNECTION IS OTHER THAN SAS SAFETY CORP. THIS DOES NOT
VIOLATE NIOSH APPROVAL (DO NOT CHANGE FITTINGS ON HOSE
AS THIS COULD NULLIFY RESPIRATOR NIOSH APPROVAL)
4
Summary of Contents for Opti-Fit 9800-25
Page 15: ...11...
