GB
6
1). Training
a) Read the instruction carefully. Be familiar with the controls and proper use of the
equipment.
b) Never allow children or people unfamiliar with these instructions to use the machine.
National regulations can restrict the use of the machine.
c) Never work while people, especially children, or pets are nearby.
d) Keep in mind that the operator or user is responsible for accidents or hazards
occurring to other people or their property.
e) Major repair work shall be carried out only by specifically trained personnel.
f) All persons and animals must be kept at least 15 meters from the machine while it is
working
2). Preparation
a) WARNING-Petrol is highly flammable:
-
store fuel in containers specifically designed for this purpose;
-
refuel outdoors only and do not smoke while refueling;
-
add fuel before starting the engine. Never remove the cap of fuel tank or add
petrol while the engine is running or when the engine is hot;
-
if petrol is spilled, do not attempt to start the engine but move the machine away
from the area of spillage and avoid creating any source of ignition until petrol
vapors have dissipated;
-
replace all fuel tank and container caps securely.
b) The brush cutter is fitted with a four-stroke engine, lubricating oil is needed before
starting the machine.
c) Before using, always visually inspect to see that the tools are not worn or damaged.
Replace worn or damaged elements and bolts in sets to preserve balance.
d) Do not smoke near the machine.
e) Do not wear loose clothing,jewelery, or similar items that could be caught in the
starter or other moving parts.
f) Never put any items into the ventilation openings. Non-observance may lead to injury,
or damage to the machine.
g) It is necessary reduction in power due to use in higher temperatures, altitudes and
humidity as below conditions.
1) Max Working Temperature: 40°C
2) Max altitudes: 1000 m
3) Max humidity: 95%
3). Operation
a) Do not operate the engine in a confined space where dangerous carbon monoxide
fumes can collect
b) Keep the machine free of oil, dirt and other impurities.
Summary of Contents for RM-MT330-2
Page 12: ...FR 12 LISTE DES PRINCIPAUX ELEMENTS ...
Page 31: ......
Page 43: ...GB 12 LIST OF MAIN PART ...
