GB
8
v) Always use the correct blade and spool recommended by the manufacturer.
w) Take care against injury to feet and hands from the cutting means.
x) Always ensure that the ventilation openings are kept clear of debris
y) Perform daily inspection fedora use and after dropping or other impacts to identify
any significant defects.
z) Keep always correct working posture, have frequently rest periods and change
working positions. Keep firm footing and balance during operation, use the harness
provided.
aa) It has been reported that, for some people, the vibrations produced by the motorized
hand tools can lead to develop a disease called Raynaud's syndrome or white finger.
Symptoms may include tingling, numbness and blanching of the fingers, usually
caused by exposure to cold. Heredity, exposure to cold and dampness, diet, smoking
and work habits are all thought to contribute to the development of these symptoms.
There is currently no evidence that a certain type of vibration or exposure actually
contributes to the development of this assignment. Some measures that can reduce
the effects of vibration, can be taken by the operator:
• Keep your body warm in cold weather. During use, wear gloves to keep your hands
and wrists warm. It has been reported that cold weather is one of the main causes of
Raynaud's Syndrome.
•After each period of operation, exercise to increase circulation.
•Take frequent breaks. Limit the duration of daily exposure.
• Keep the tool well maintained, all fasteners tightened and worn parts replaced.
• In case of occurrence of one or more of the symptoms described above, stop using
the tool and seek medical attention.
4). Maintenance and storage
a) Keep all nuts and screws tight to be sure the equipment is in safe working condition.
b) Never store the equipment with petrol in the tank inside a building where fumes can
reach an open flame or spark.
c) Allow the engine to cool before storing in any enclosure.
d) To reduce the fire hazard, keep the engine, silencer and petrol storage area free of
vegetative material and excessive grease.
e) Replace worn or damaged parts for safety.
f) If the fuel tank has to be drained, this should be done outdoors.
g) Always clean and maintenance before storage.
h) Never disassembly the guards for cutting attachments.
i) Always store the metal blade in cool and dry place, never use rusted blade. It may
cause serous injure during working.
5) TRANSPORTATION AND HANDLING
a) Whenever the machine is to be handled or transported you must:
Summary of Contents for RM-MT330-2
Page 12: ...FR 12 LISTE DES PRINCIPAUX ELEMENTS ...
Page 31: ......
Page 43: ...GB 12 LIST OF MAIN PART ...
