45
Basic thermostat setting
Setting the clock
Pressing the
button enters the clock and day setting mode. When in editing mode, the current setting position will
blink. First you are setting the time
–
hours and minutes. You can change the value by
pressing
or
buttons. When
you are done setting the time, press the
button and you will continue to setting the current day. Again, you change
the value by pressing
or
buttons. When you are done setting the time/date values, press the
R
button to
exit and
save.
Programming the heating modes and schedules
By short pressing the
P
key, you enter heating mode programming. For every program and schedule
you can look up
to the default tables on the next pages.
When you are in editing mode, you can use the
P
button to switch between the settings (days, clock, temperature and
timer) and
or
keys to change the desired values (when the selected value flashes).
We can choose the settings for 7, 5 + 2, 5 + 1 + 1 days and
4 or 6
time switches. As the default program schedule
setting
is set the 7
-
day program with 6 time programs. For changing these values, please refer to advanced settings.
If you won’t change any of the schedules, the default settings will stay. For reference, check the tables in the next pages.
If you are not happy with your settings you’ve made, you can always set them back to factory default by holding button
R
for 3 seconds. All changes made to the schedules will be lost and set to factory default! The display will show dEF.
When editing, if you don’t press any button for about 15 seconds, the device will save any changes made until then. You
can return to editing by going back with the same procedure.
