16
Advanced thermostat settings
You can set the temperature limits, heating mode temperatures, hysteresis, etc.
To access advanced thermostat settings, you have to turn the thermostat off, by holding the middle menu button for 3
seconds. When the thermostat is OFF and the display is not showing anything, you have to hold the middle menu
button for 3 seconds. Now, the display should turn on and you should see the first set value and on the bottom of the
screen a number “1”, which lets you know, that you’re changing the settings for the first step (check the table below).
You can change the settings by pressing
+
or
–
and move to the next setting by pressing the middle menu button. Any
changes made are automatically saved if you don’t press anything for 8 seconds.
Step
Factory
default value
Setting
options
Description
1
30.0°C
20.0°C –
35.0°C
Here you can set the highest working room temperature for heating.
2
05.0°C
05.0°C –
20.0°C
Here you can set the lowest working room temperature for heating.
3
16.0°C
10.0°C –
20.0°C
Lower, Night mode temperature
– this temperature is used when you’re
using the Night mode, for example, at night or when you’re away.
4
21.0°C
20.0°C –
25.0°C
Higher, Day mode temperature
– this temperature is used when you’re
using the Day mode, for example, during the day or when you’re at home.
