86
Operating Instructions SATA air star F
EN
[1-3]
Mask cap
[1-4]
Exhaling membrane
[1-5]
Breathing filter
[1-6]
Pre-filter
[1-7]
Pre-filter cap
7. Technical Data
Description
Operating temperature
-30 °C – +60 °C
Storage temperature
-10 °C – +55 °C
Weight incl. 2x A2P3 filters and
pre-filter holder
385 g
8. First Use
8.1. Assemble the half mask
Note!
When assembling the half mask, do not press against the thin braces in
the exhaling part.
■
Position the head straps and the lower straps.
■
Fit the mask cap in the nose section of the mask body.
■ Press the mask cap firmly onto the exhaling valve part until it slots in
completely, without squeezing the head straps and lower straps.
■
Check easy movement of the head straps and lower straps.
8.2. Insert pre-filter
■ Assemble breathing filter with pre-filter and pre-filter holder (see chap
-
ter 10.2).
8.3. Insert breathing filter and clean half mask
Note!
Before using for the first time, the half mask must be cleaned thoroughly
with the provided cleansing wipes.
■ Insert breathing filter in half mask (see chapter 10.1).
■
Clean mask body
[9-4]
and rubber seal
[9-3]
thoroughly with the en-
closed cleansing wipes
[9-5]
.
Summary of Contents for air star F
