116
EN
Operating instructions SATAminijet 1000 K/H RP/HVLP
7.4. Painting
Fully pull trigger for painting
[6-1]
. Operate spray gun according to
[6-2]
.
Maintain spray distance as described in chapter 2.
8. Cleaning of the Spray Gun
Warning! Attention!
•
Prior to cleaning, please disconnect the spray gun from the compressed air
circuit!
•
Risk of injury due to unexpected leakage of compressed air or mate-
rial!
•
Empty spray gun and suction cup completely, dispose of paint mate-
rial appropriately!
•
Disassemble and assemble components very carefully! Exclusively
use included special tools!
•
Use neutral cleaning solution (pH value 6 to 8)!*
•
Do not use acids, lyes, pickling agents, unsuitable re-
claimed materials or other aggresive cleaning media, such
as Toluol, for example!*
•
Do not soak spray gun in cleaning solution!
*
•
Drillings must be cleaned with SATA cleaning brushes or SATA cleaning
needles only. The use of inappropriate tools could cause damage and
affect the spray pattern.
Recommended accessory
: cleaning kit
Art.
No. 64030
.
•
Exclusively use spray gun washing machines recommended by SATA!
Please observe the operating instructions!
•
The air passages have to be set under pressure with clean compressed
air during the entire cleaning process!
•
Nozzle head has to point downwards!
•
Remove the spray gun from the gun washing machine right
after the cleaning process!*
•
Never use ultrasonic cleaning devices
- leads to damage of noz-
zle components and gun surfaces!
•
After cleaning, the spray gun, the material passages, the air
cap including thread and suction cup have to be blown dry
with clean compressed air!*
