111
EN
Operating instructions SATAminijet 1000 K/H RP/HVLP
Operating instructions SATAminijet 1000 K/H RP/HVLP
4. Design of the Spray Gun [1]
[1-1]
Spray gun handle
[1-2]
Trigger
[1-3]
Material connection
[1-4]
Nozzle set consisting of air
cap, fluid tip (not visible),
paint needle (not visible)
[1-5]
Round/flat spray control
[1-6]
Material flow control screw
[1-7]
Material flow control counter
nut
[1-8]
Air micrometer
[1-9]
Air micrometer (air flow con
-
trol) locking screw
[1-10]
Air piston (not visible)
[1-11]
Compressed air connection
[1-12]
ColorCode-System (CCS)
5. Intended Use
The spray gun has been designed for the application of paints, lacquers
and other sprayable media by means of compressed air on suitable sub-
strates and surfaces.
6. Safety Instructions
6.1. General Safety Instructions
Warning! Attention!
•
Before using the spray gun, please read all safety and the operating
instructions carefully. Safety instructions and indicated safety meas-
ures are mandatory.
•
Please keep all enclosed documents and make sure that the spray
gun is handed over only together with these documents.
