Operating instructions SATAjet 1000 K (RP/HVLP), H RP
To avoid overspray and surface problems, make sure to paint with the correct
spraying distance between gun nozzle and the object to be painted and to
adjust the spray gun inlet pressure accordingly.
Version
Spray distance
Gun inlet pressure
jet 1000 K RP
18 - 23 cm/7 - 9 inches
2,0 - 2,5 bar/29 - 36 psi
jet 1000 K HVLP
13 -21 cm/5 - 8 inches
2,5 bar/36 psi
jet 1000 H RP
18 -23 cm/7 - 9 inches
1,5 - 2,0 bar/22 - 29 psi
4.8 Spray distance
Complete, hand-checked nozzle-set, consisting of paint needle (V4A), paint
nozzle (V4A) and air cap. Mount the nozzle set tightly (use universal wrench
for the paint nozzle). Insert paint nozzle before putting in paint needle. The
air cap should be placed in a position in which the marking is on top. Use
punched hexagon socket (wrench size 12) of universal wrench for paint
nozzle. Only original SATA parts guarantee highest quality and lifetime.
4.7 Nozzle set
When mounting foreign parts, quality reduction is possible and the SATA
warranty expires resp. dangers to your health may occur.
Nozzle sets, jet 1000 K RP version
132159 for SATAjet 1000 K RP 0,8
132167 for SATAjet 1000 K RP 1,1
132175 for SATAjet 1000 K RP 1,3
132183 for SATAjet 1000 K RP 1,5
132191 for SATAjet 1000 K RP 1,7
132209 for SATAjet 1000 K RP 2,0
153528 for SATAjet 1000 K RP 2,5
153536 for SATAjet 1000 K RP 3,0
Nozzle sets, jet 1000 H RP version
151613 for SATAjet 1000 H RP 1,6
151621 for SATAjet 1000 H RP 1,8
153379 for SATAjet 1000 H RP 2,0
Nozzle sets, jet 1000 K HVLP version
139253 for SATAjet 1000 K HVLP 0,8
139261 for SATAjet 1000 K HVLP 1,0
139279 for SATAjet 1000 K HVLP 1,2
139287 for SATAjet 1000 K HVLP 1,6
139295 for SATAjet 1000 K HVLP 2,0
Illustration similar
Illustration
similar
Adjust material flow control
in accordance with spray viscosity and required flow rate (arrow 1 ) and fix
by means of the counter nut (arrow 2 ). Under normal circumstances, the
material flow control is fully open.
4.5 Material
fl
ow control
2
1
Round/flat spray control for right-handed painters
for infinitely variable adaptation of the spray fan to the object:
Turn to the left -
flat spray
Turn to the right -
round spray
4.6 Round/
fl
at spray control
Illustration
similar
Illustration similar
english
IX.5
129635_jet1000_K_H.indd 93
129635_jet1000_K_H.indd 93
19.08.2008 10:38:38
19.08.2008 10:38:38
